To erase all preset memories:
Front Panel
1. Enter the CONTROL menu on the Front Panel interface.
2. Scroll down and select Reset/Erase to access the reset and erase menu.
3. Select Reset Preset Memories to start clearing up the preset bank:
• Select YES to confirm (/!\ this action is irreversible.
• Select NO to cancel.
Web RCS
1. Go to the Setup menu on the Web RCS interface.
2. Click on the CONTROL tab to access the device settings and control functions.
3. In the left side toolbar, select Erase Memories to access the erase memories page.
4. Under Erase Preset Bank, click on the Start button:
• Click again to confirm (/!\ this action is irreversible).
• Click elsewhere to cancel the action.
To Next Page
Loading...
Need help?
General
