In Src MACSrc MAC and Src IPSrc IP, set the source MAC address and the source IP address
of ARP request and Ping request.
For applications also including an OTN interface, you can find a description of
the setup options and status information for OTN in the following section:
OTN Setup and Status
Please refer to the sections relevant for your current port setup requirements.
VLANVLAN
VLANVLAN is displayed for the Reflector application.
Select the VLAN check box and set Level count and IDs for VLAN of incoming
frames.
66..88..22 Test SetupTest Setup
66..88..22..11 ControlControl
Refer to Control in BERT Test Setup subsection for the operation.
66..88..22..22 ThresholdsThresholds
Touching the ThresholdsThresholds button in the navigation area displays the following
screen.
The FollowFollow button appears when the Port 2 settings can follow Port 1.
To Next Page
Loading...
