ExportExport: saves the pattern to a file.
opCodeopCode
This item appears if Sub type is set to Control sub typeControl sub type. When other than
Control sub typeControl sub type is selected, touch the field right-hand to enter a number.
PayloadPayload
Payload patternPayload pattern
Select a PRBS type.
88..44..22 Test SetupTest Setup
88..44..22..11 ControlControl
Refer to "Control" in Ethernet BERT Test Setup subsection for the operation.
BERT OptionsBERT Options
Selecting the check box enables to set items in the frame.
88..44..22..22 GeneratorGenerator
Refer to "Generator" in Ethernet BERT Test Setup subsection for the operation.
88..44..22..33 Stream - ProfileStream - Profile
Refer to "Stream - Profile" in Ethernet BERT Test Setup subsection for the
operation.
Following points are changed in eCPRI/RoE BERT application:
Stream profile is fixed to DataData.
Encoding and Number of channels are not displayed.
Frame size is fixed to ConstantConstant.
88..44..22..44 Stream - Meas.Stream - Meas.
Refer to "Stream - Meas." in Ethernet BERT Test Setup subsection for the
operation.
88..44..22..55 ThresholdsThresholds
Refer to "Thresholds" in Ethernet BERT Test Setup subsection for the operation.
To Next Page
Loading...
