LSSLSS
The currently Link Status Signal is shown by the icon.
Red means that the link is not established.
Green means that the link is established.
Bit errorBit error
The bit error status is indicated by the use of colored Lamp icons.
FrequencyFrequency
Shows the input signal frequency and the deviation of the input signal from the
nominal bit rate in ppm. In case of multi lanes, the frequencies and deviations
are displayed by each lane.
CDR LockCDR Lock
The clock data recovery status is shown by the icon.
Red means that the timing clock cannot be recovered from received data.
Green means that the timing clock is ok.
Sym. errSym. err
This item appears when Interface Type is set to QSFP56QSFP56, QSFP-DDQSFP-DD, or OSFPOSFP.
An icon indicates PAM4 symbol error ocurrance status.
Red means that PAM4 symbol errores are ocurring.
Green means that no PAM4 symbol errores are ocurring.
1010..11..22..33 TransceiverTransceiver
Refer to Transceiver in "Ethernet Setup and Status" section.
To Next Page
Loading...
