Appendix E Sequence Examples
E-2
E.1 System Configuration
The system configuration for the sequence examples consists of the
MP1800A with the following devices installed.
The values of "X" in "MOD:ID X" and ":USB:ID X" should be altered if
the device installation locations are changed.
Table E.1-1 System configuration for sequence examples
Unit Module
Module
Name
Remarks
UENT
(MP1800A)
MOD1 MU181000A Synthesizer
MOD2
MOD3 MU183020A PPG
MOD4 MU183040B ED
MOD5 MU181500B Jitter Module
The setting procedure, such
as for initialization, will differ
if the MU181500B is not
installed.
MOD6
USB7 - MP1861A MUX
USB11 - MP1862A DEMUX
To Next Page
Loading...
