3.2 Inter-Module Connection
3-7
3
Panel Layout and Connectors
3.2.1 1ch TRx connection
This section describes a connection example using one MP1862A and one
MP1861A 56G/64G MUX (hereafter, MP1861A).
According to the following procedure, connect the equipment as shown in
Figure 3.2.1-1.
[Equipment configuration]
MP1862A (this module)
MP1861A
MP1800A
MU183020A-x22/x23+x31
MU183040B
MU181500B
MU181000A
DUT (Device under test)