Anritsu MT1810A - Initialization

E.2 Initialization
E-5
App
endix
A
ppendix E
The items shaded in gray in the table above should be replaced with the
following remote commands if the MU181500B Jitter Module is not
installed in Slot 5 and 6.
Remote Commands Explanation of Commands
:UENT:ID 1;:MOD:ID 3
:SYST:INP:CSEL INT
Wait 1000 ms. *
2
Sets the remote command destination to PPG.
Links the PPG and Synthesizer.
Link setting requires about one second.