Anritsu MT1810A - Appendix E Sequence Examples

E-1
App
endix
A
ppendix E
Appendix E
Sequence Examples
This appendix describes sequence examples for BER and automatic
measurement using 64G MUX and 64G DEMUX with remote commands.
E.1
System Configuration ................................................... E-2
E.2 Initialization ................................................................... E-4
E.3 Setting Examples of Measurement Conditions ............. E-6
E.3.1 Setting example of Test Conditions
- Pattern, Measurement - ................................. E-6
E.3.2 Setting example of Test Conditions
- RF Output / Input - .......................................... E-6
E.3.3 Setting example of Test Conditions
- Data Bitrate - .................................................. E-7
E.3.4 Setting example of Test Conditions
- Jitter Input- ..................................................... E-7
E.3.5 Setting example of Test Conditions
- Data Output ON - ........................................... E-9
E.4 Auto Search Execution Example ................................ E-10
E.5 Measurement .............................................................. E-11
E.5.1 BER measurement execution example .......... E-11
E.5.2 Eye Margin measurement execution
example .......................................................... E-12
E.5.3 Eye Diagram measurement execution
example .......................................................... E-14
E.5.4 Bathtub measurement execution example ..... E-16
E.6 Use Example of Status Command.............................. E-18