APRILIA MXV 450 - Page 157

•
Disconnect the rear cylinder injector
connector.
•
Release the cable harness from the
clamp.
CAUTION
UPON REMOVING THE CONNECTOR MARK IT IN ORDER
NOT TO INVERT WHEN REFITTING.
See also
Throttle grip cables replacement
•
Disconnect the throttle valve position
sensor connector.
•
Release the cable harness from the
clamp.
•
Disconnect the front cylinder injector
connector.
CAUTION
UPON REMOVING THE CONNECTOR MARK IT IN ORDER
NOT TO INVERT WHEN REFITTING.
•
Lift the throttle body and disconnect the
connector of the Stepper motor.
•
Disconnect the throttle grip cables from the throttle body.
MXV 450 Power supply
P SUPP - 157