Removing the engine from the vehicle
•
Disconnect the front electrical cable
harness connector.
•
Remove the two screws fixing the reg-
ulator.
•
Move the regulator, connected to the
cable harness, at the back of the filter
housing.
•
Remove the rear brake lever by undo-
ing the screw (1).
•
Release the cable harness from the
clamps on the chassis.
•
Working from both sides, release the
clamp between the aluminium tube
and the rubber hose in the radiator.
Engine from vehicle MXV 450
ENG VE - 74
To Next Page
Loading...
