•
Place the calliper in its position.
•
Tighten the two calliper fixing screws.
•
Remove the OPTIONAL front stand,
resting the vehicle on the side stand.
•
Fasten the sensor cable with a clamp.
•
Position the mudguard and tighten the
four fixing screws.
•
Tighten the two screws fixing the front
mudguard tie rod.
Rear
Removing the rear wheel
•
Rest the vehicle on the specific OP-
TIONAL stands.
•
Unscrew and remove the nut and re-
trieve the washer.
Suspensions MXV 450
SUSP - 186
To Next Page
Loading...
