APRILIA MXV 450 - Fuel Pump; Technical Specifications

Fuel pump
FUEL SUPPLY UNIT
Fitted on the tank upper part, returnless type.
The fuel circuit pressure regulator is placed inside
the pump to keep a pressure of about 3.5 bar (350
kPa; 50.76 PSI).
TECHNICAL SPECIFICATIONS
Fuel pump resistance: 1.5 Ω approx. (pins 1 and
2).
Diagram key:
1. Pressure regulator
2. Fine filter
3. Pump
4. Pre-filter
Coil
•
Remove the fuel tank.
•
Remove the filter casing cover.
•
Disconnect the coil connector.
MXV 450 Electrical system
ELE SYS - 65