Recommended products chart
RECOMMENDED PRODUCTS TABLE
Product Description Specifications
AGIP RACING 4T 10W-60 engine oil Use top-branded oils that meet or exceed
the CCMC G-4 API SG. SAE 10W-60
specifications requirements
AGIP GEAR SYNTH SAE 75W-90 Synthetic lubricant for gearboxes and
transmissions.
API GL4 - API GL5
AGIP PERMANENT SPEZIAL Coolant Ready mixed biodegradable coolant with
"long life" technology and characteristics
(red). Freezing protection up to -40°C.
Compliant with CUNA 956-16 standard.
AGIP BRAKE 4 Brake fluid As an alternative to the recommended
fluid, other fluids that meet or exceed the
required specifications may be used.
SAE J1703, NHTSA 116 DOT 4, ISO
4925 Synthetic fluid
AGIP MP GREASE Grease for bearings, joints, couplings
and leverages
As an alternative to the recommended
product, use top brand grease for roller
bearings with an operating temperature
range of -30°C...+140°C (-22°F...+284°
F), a drop point of 150°C...230°C (302°
F...446°F), high corrosion protection
qualities and good water and rust resist-
ance.
AGIP FORK 7.5W Fork oil SAE 7.5W
CHAIN GREASE Chain spray grease Adhesive, non-drip lubricating grease
spray for chains. Recommended for all
types of chains, including those with O-
ring gaskets. High adhesive strength. A
thin and resistant layer protects chains
against wear, reduces stretching and
keeps them flexible
MXV 450 Characteristics
CHAR - 17
To Next Page
Loading...
