APRILIA MXV 450 - Page 196

Installing
•
Check the correct positioning of the
chain on the pinion and the sprocket.
•
Fit the chain with the two ends joined
at a point between the pinion and the
sprocket on the lower branch of the
chain.
•
Join the two ends of the chain and fit
the master link pins from the inside to
the outside.
•
Fit the plate in the master link pins.
CAUTION
THE PLATE MUST BE FITTED WITH THE OPEN PART FAC-
ING THE SENSE OPPOSITE THE ADVANCE DIRECTION.
•
Fit the clip in the master link pins.
Chassis MXV 450
CHAS - 196