•
Place the rear brake pedal.
•
Tighten the rear brake pedal fixing
screw (1).
•
Fit the drive chain.
•
Place the clutch cable.
•
Position the voltage regulator again
and fasten it by tightening both screws.
•
Connect the front cable harness.
•
Fasten the electrical cable harness on
the chassis with the clamps.
•
Fill the cooling system and adjust
clearance: chain, clutch cable and
throttle grip cables.
MXV 450 Engine from vehicle
ENG VE - 79
To Next Page
Loading...
