VAR8 and Variants Operation, Commissioning, Fault Finding, and Maintenance Guide -
Is
Page 147 of 166
sue: 02 complete, approved
VAR8 Menu Description
Ref. Item Description/Possible Settings
164 Learn Check
(V1.5.0115 or later)
Enables the user to enable or disable the amplifier learn check. When Learn
Check is enabled, following power cycle or fault clearance, the Router checks if
any frames are configured (i.e. a Learn has been performed). If no frames are
configured a new fault is raised.
Possible values:
‘Frame Learn Check enabled’ or
‘Frame Learn Check suppressed’
Default value:
‘Frame Learn Check enabled’
To Next Page
Loading...
