All Surface Loader
7. Radiator/Oil Cooler Disassembly and Assembly
7-8
Fan Guard Adjustment
The tools required for fan guard adjustment are
listed in Table 7-5. Use manufacturer-recommended
tools whenever possible.
Table 7-5
Tool Name
Combination Wrench
Figure 7-29 7-002
1. The fan guard can adjusted forward or rearward.
To adjust, loosen the capscrews that fasten the
fan guard to the fan guard mounts. Tighten the
capscrews when finished.
Loosen
Capscrews
to Adjust
https://www.tractormanualpdf.info/
To Next Page
Loading...
