Rubber Track Loader
11. Engine Components Disassembly and Assembly
11-6
Figure 11-18 11-008
3. Disconnect the battery cable from the positive
battery terminal.
Figure 11-19 11-009
4. Remove the two capscrews from the battery
holdown bracket and remove the bracket.
Figure 11-20 11-010
5. Rotate the battery 90 degrees counter-
clockwise. Tilt up the front of the battery and
remove the battery from the machine.
Battery Installation
Figure 11-21 11-011
1. Place the battery in position in the engine com-
partment.
Figure 11-22 11-009
2. Position the battery holdown bracket and install
the two capscrews and nuts.
Figure 11-23 11-008
3. Connect the battery cable to the positive battery
terminal.
Disconnect
Positive
Cable
Remove
Capscrews
Install
Capscrews
Connect
Positive
Cable
https://www.tractormanualpdf.info/
To Next Page
Loading...
