Rubber Track Loader
6. Chassis Disassembly and Assembly
6-6
Remove
Filler Hose
Figure 6-20 6-012
10. Remove the rubber filler hose from the back end
or the tank.
Figure 6-21 6-013
11. Remove the tank carefully from the machine.
Fuel Tank Installation
Figure 6-22 6-013
1. Place the fuel tank in the machine in approxi-
mately its normal position.
Attach
Filler Hose
Figure 6-23 6-012
2. Attach the filler hose to the rear of the tank.
Connect
Vent Hose
Figure 6-24 6-011
3. Connect the vent hose to the fuel tank.
Insert
Bolt and
Washer
Figure 6-25 6-010
4. Insert the bolt and washer that connect the fuel
tank to the frame.
https://www.tractormanualpdf.info/
To Next Page
Loading...
