ASV RC30 User Manual

Rubber Track Loader
12. Undercarriage Disassembly and Assembly
12-4
Sprocket Roller Removal
Figure 12-11 12-057
1. Rotate the drive sprocket to allow access to the
sprocket roller bolt. Remove the bolt.
Figure 12-12 12-058
2. Remove the roller and steel pin from the drive
sprocket.
Figure 12-13 12-019
3. Inspect the rollers for wear and replace as nec-
essary. The steel pin will normally not need re-
placing unless the roller has worn completely
away and the steel pin is worn from engaging
the track.
Sprocket Roller Installation
Figure 12-14 12-059
1. With the drive sprocket rotated to the desired
position, position the composite roller and steel
roller in the drive sprocket.
Figure 12-15 12-060
2. Insert the sprocket roller bolt with the nut facing
out and tighten.
Brake Removal and
Installation
The tools required for brake removal and installation
are listed in Table 12-3. Use manufacturer-
recommended tools whenever possible.
Table 12-3
Required Tools
Socket Wrench
Combination Wrench
Position Drive
Sprocket to
Access Roller
Roller
Steel Pin
https://www.tractormanualpdf.info/

ASV RC30 Specifications

General

Brand	ASV
Model	RC30
Category	Compact Loader
Language	English