All Surface Loader
7. Radiator/Oil Cooler Disassembly and Assembly
7-6
Figure 7-19 7-003
9. Remove the three mounting bolts on each side
of the radiator/cooler.
Figure 7-20 7-013
10. Remove the radiator/cooler from the engine
compartment.
Radiator/Cooler Installation
Figure 7-21 7-013
1. Position the radiator/cooler in the engine com-
partment.
Figure 7-22 7-003
2. With the radiator/cooler in position, install the
three mounting bolts on each side of the radia-
tor/cooler.
Figure 7-23 7-012
3. Remove the hose and fitting caps and install the
lower hose on the radiator section.
Figure 7-24 7-011
4. Remove the hose and fitting caps and install the
upper hose on the radiator section.
Install
Bolts
Remove
Bolts
https://www.tractormanualpdf.info/
To Next Page
Loading...
Need help?
General
