Page 12 2000-1252-01 Released Rev. C
VersaPort 2200 Technical Manual
Chapter 1: Safety
Labeling
a
Labeling
Description of Labels used on the VersaPort
TABLE 1 List of VersaPort Labels
No. Label Description / Location
1
Laser Interlock
The interlock label warns users that
an eye hazard exists if the safety
interlock of the laser system is
defeated. The label is located on the
shield for the port opening.
(4001-9361-01)
2
Laser Label
The laser manufacturer’s caution
label is attached to the laser bracket
cover on the Process Tool-edge of the
VersaPort port plate. (7500-3204-01)
3
CE
This label identifies equipment that
conforms to testing and certification
requirements of the European
Community. The CE label is located
at the user-side of the Versaport,
behind the minienvironment shield.
(4001-8750-01)
4
Model & Serial Number
The model and serial number label
for the VersaPort is located on the
Process Tool-side of the interface
frame. This number is required when
contacting Asyst Technologies for
any matter concerning the equipment.
(9600-1194-01)
CAUTION
LASER RADIATION WHEN OPEN
AND INTERLOCK DEFEATED
DO NOT STARE INTO BEAM
46897 BAYSIDE PKWY
To Next Page
Loading...