Automationdirect.com Stride SIOL-EI8B - Page 106

SIOL-EI8B-USER-M
97
Powered by
Version 1, May 2022
Conguring a Module Using Studio5000 Logix Designer
Fig. C-2: EDS Wizard.
➔ Click Next and follow the instructions of the dialog window.
➔ Finish the installation of the EDS les.
The modules can now be selected and added to the network.
NOTE
The EDS le can be found at https://go2adc.com/iolink under the part number of the module.