Automationdirect.com Stride SIOL-EI8B - CIP Status Codes

SIOL-EI8B-USER-M
66
Operation Powered by
Version 1, May 2022
9.3.3. CIP status codes
CIP error codes
The following table provides a brief overview of which CIP status code can be returned when accessing
the “IO-Link Device Parameter Object” via a CIP service. The table does not claim to be complete.
CIP Status Codes
Name Description
0 (0x00) Success. Service was successfully performed.
5 (0x05) Path destination unknown. Addressed CIP Class or CIP Instance is not known.
8 (0x08) Service not supported. The requested service is not implemented or was not dened for this Object Class/Instance.
19 (0x13) Not enough data. The service did not supply enough data to perform the specied operation.
20 (0x14) Attribute not supported. The attribute specied in the request is not supported.
21 (0x15) Too much data. The service supplied more data than was expected.
30 (0x1E)
An embedded service resulted in an error. The IO-Link specic error codes within the CIP response data might provide
more information about what went wrong.