Automationdirect.com Stride SIOL-EI8B - Technical Data; Electrical Data

SIOL-EI8B-USER-M
14
Technical Data Powered by
Version 1, May 2022
4. Technical Data
4.1. Electrical Data
Functions
Web Interface
http Yes
Energy monitoring
Current and voltage Yes
Temperature monitoring
Yes
Bus Data
Fieldbus protocol
EtherNet/IP
Ethernet
10/100 Mbit/s
Addressing
BOOTP, DHCP, WebUI, Rotary encoder switch
Connection types
Exclusive Owner, Listen Only, Input Only

Beacon-based
Connector
M12, 4-pin, D-coded
IO-Link

24VDC

20–30V
Transfer rate
4.8, 38.4 or 230.4 kbit/s (COM1, COM2, COM3)

IO-Link V1.1.3
Transfer rate recognition
Automatic
Supply
Operating voltage US
24VDC
Voltage range US
18–30V
When using IO-Link 20.3–30V
Operating voltage UA
24V
Voltage range UA
18–30V
Sensor current US
≤40°C [104°F] (see Derating) ≤16A
Actuator current UA
≤40°C [104°F] (see Derating) ≤16A
Current consumption
At idle ≤0.18 A
Connector
M12, 5-pin, L-coded
Conductor cross-section
Current per supply ≤12A #14 AWG
Current per supply >12A #12 AWG