Automationdirect.com Stride SIOL-EI8B - About this Manual; Symbols; Trademarks; Specifications

SIOL-EI8B-USER-M
2
Introduction Powered by
Version 1, May 2022
1.2. About this manual
1.2.1. Symbols
This document includes information and notes that must be observed for your own safety and to avoid
injuries and equipment damage. They are marked as follows:
⚠ DANGER!
Immediate danger
Failure to observe this warning involves an imminent risk of death or serious injuries.
⚠ WARNING!
Possible danger
Failure to observe this warning can lead to death or serious injuries.
⚠ CAUTION!
Low-risk danger
Failure to observe this warning can lead to mild or moderate injuries.
NOTICE
Possible material damage
Failure to observe the warning may cause damage to the device and/or the system.
NOTE
Other technical information and notes
DOCUMENTATION RECOMMENDATION
Notes with this symbol are references to additional information elsewhere in the documentation.
Instructions for use
➔ An arrow marks instructions.
➔ Read and follow the instructions.
1. If the instructions are numbered, it is absolutely necessary to follow them in the correct order.
2. Read and follow the instructions in the order shown.
1.2.2. Trademarks
Trademarks of the following companies and institutions are used in this documentation:
EtherNet/IP ODVA, Inc.
IO-Link c/o PROFIBUS Nutzerorganization e.V. (PNO)
STUDIO 5000 LOGIX DESIGNER Rockwell Automation Inc.
1.2.3. Specications
Specication Link
EtherNet/IP Specication http://www.odva.org
IO-Link Version 1.1.2, dated 2013-07 http://www.io-link.com
The features of IO-Link specication version 1.1.3 are also supported.
1.2.4. Software tools
Software used
Productivity Suite
Murrelektronik IO-Link Device Tool