Automationdirect.com Stride SIOL-EI8B - Functional Ground

SIOL-EI8B-USER-M
22
Mounting Powered by
Version 1, May 2022
Mounting
Mount the module in the order indicated below:
1. Slightly tighten the top M6 bolt.
2. Align housing.
3. Slightly tighten the lower M6 bolt.
4. Tighten screws M6 according to the torque.
5. Ground the module. Attach the grounding strap as shown in Section 5.4.1, “Functional ground”.
NOTE
The screws and the grounding strap illustrated are not included with the device.
5.4.1. Functional ground
With grounding strap
NOTE
Use a conductive screw to attach the grounding strap.
Screw Size Torque Tool Required
M4 1.2 N·m [11 in·lb]
Phillips Screwdriver,
Part # TW-SD-PH-2
M4
Fig. 5-4: Attachment the grounding strap.