~ WARNING ~
Thank you for purchasing automation equipment from Automationdirect.com
®
, doing business
as AutomationDirect. We want your new automation equipment to operate safely. Anyone
who installs or uses this equipment should read this publication (and any other relevant
publications) before installing or operating the equipment.
To minimize the risk of potential safety problems, you should follow all applicable local and
national codes that regulate the installation and operation of your equipment. These codes
vary from area to area and usually change with time. It is your responsibility to determine
which codes should be followed, and to verify that the equipment, installation, and operation is
in compliance with the latest revision of these codes.
At a minimum, you should follow all applicable sections of the National Fire Code, National
Electrical Code, and the codes of the National Electrical Manufacturer’s Association (NEMA).
There may be local regulatory or government oces that can also help determine which codes
and standards are necessary for safe installation and operation.
Equipment damage or serious injury to personnel can result from the failure to follow all
applicable codes and standards. We do not guarantee the products described in this
publication are suitable for your particular application, nor do we assume any responsibility for
your product design, installation, or operation.
Our products are not fault-tolerant and are not designed, manufactured or intended for use or
resale as on-line control equipment in hazardous environments requiring fail-safe performance,
such as in the operation of nuclear facilities, aircraft navigation or communication systems,
air trac control, direct life support machines, or weapons systems, in which the failure of
the product could lead directly to death, personal injury, or severe physical or environmental
damage (“High Risk Activities”). AutomationDirect specically disclaims any expressed or
implied warranty of tness for High Risk Activities.
For additional warranty and safety information, see the Terms and Conditions on our website.
If you have any questions concerning the installation or operation of this equipment, or if you
need additional information, please call us at 770-844-4200.
This publication is based on information that was available at the time it was published. At
AutomationDirect we constantly strive to improve our products and services, so we reserve
the right to make changes to the products and/or publications at any time without notice and
without any obligation. This publication may also discuss features that may not be available in
certain revisions of the product.
This publication may contain references to products produced and/or oered by other
companies. The product and company names may be trademarked and are the sole property
of their respective owners. AutomationDirect disclaims any proprietary interest in the marks
and names of others.
2022
®
No part of this manual shall be copied, reproduced, or transmitted in any way without the prior,
written consent of Automationdirect.com
®
Incorporated. AutomationDirect retains the exclusive
rights to all information included in this document.
To Next Page
Loading...
