Avaya J129 - Page 284

Parameter name Default
value
Description
PLAY_TONE_UNTIL_RTP 1 Specifies whether locally-generated
ringback tone stops as soon as
SDP is received for an early media
session, or whether it will continue
until RTP is actually received from
the far-end party.
Value operation:
• 0: Stop ringback tone as soon as
SDP is received.
• 1: Continue ringback tone until
RTP is received (default).
POE_CONS_SUPPORT Enables power over Ethernet
conservation mode.
Value operation:
• 0: Power conservation mode is
not supported.
• 1: Power conservation mode is
supported.
PRESENCE_ACL_CONFIRM 0 Specifies the handling of a
Presence ACL update with pending
watchers.
Value operation:
• 0: Auto confirm. Automatically
send a PUBLISH to allow
presence monitoring (default).
• 1: Ignore. Take no action
This parameter is not supported in
IP Office environment as presence
is not supported.
PRESENCE_SERVER Null Specifies the address of the
Presence server. This parameter is
supported only for backward
compatibility.
The value of this parameter is used
from PPM and not from the settings
file.
This parameter is not supported in
IP Office environment as presence
is not supported.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 284
Comments on this document? infodev@avaya.com