Avaya J129 - Certificates Field Descriptions; Configuring Certificates; Serial Port

Name Description
Serial Port Specifies if the port for network traffic is enabled or disabled.
The options are:
• Enable
• Disable (default)
Related links
Debugging on page 137
Configuring certificates
About this task
Avaya J100 Series IP Phones display the details of the configuration fields in the Description
section of the screen.
Procedure
1. Log in to the web interface as an administrator.
2. In the navigation pane, click Certificates.
3. Configure the following areas:
• Certificates
• Online Certificates Status Protocol (OCSP)
• SCEP
• PKCS12
• Web Server
4. Click one of the following:
• Save: To save the configuration changes.
• Reset to Default: To revert to the default values.
Related links
Configuring the phone using the web interface on page 92
Certificates field descriptions on page 141
Certificates field descriptions
Name
Description
Certificates
Available Trusted Certificate Displays the file names of available certificates for authentication.
Upload Trusted Certificate Specifies the trusted certificate used by the phone. You can also
browse and upload the certificates from the local PC by clicking
Browse > Import.
Table continues…
Phone configuration
July 2019 Installing and Administering Avaya J100 Series IP Phones 141
Comments on this document? infodev@avaya.com