Avaya J129 - Page 288

Parameter name Default
value
Description
PROVIDE_KEY_REPEAT_DELAY 0 Specifies how long a navigation
button must be held down before it
begins to auto-repeat, and if an
option is provided by which the user
can change this value.
Value operation:
• 0: Default (500ms) with user
option (default).
• 1: Short (250ms) with user option.
• 2: Long (1000ms) with user
option.
• 3: Very Long (2000ms) with user
option.
• 4: No Repeat with user option.
• 5: Default (500ms) without user
option.
• 6: Short (250ms) without user
option.
• 7: Long (1000ms) without user
option.
• 8: Very Long (2000ms) without
user option.
• 9: No Repeat without user option.
PROVIDE_LOGOUT
Specifies if user can log out from
the phone.
Value operation:
• 0: No
• 1: Yes
Note:
This parameter is set to 0 in IP
Office environment.
PROVIDE_NETWORKINFO_SCREEN Specifies if the Network
Information menu is displayed on
the phone.
Value operation:
• 0: No
• 1: Yes
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 288
Comments on this document? infodev@avaya.com