Parameter name Default
value
Description
RDS_MAX_RETRY_TIME 600 Specifies the maximum delay
interval in seconds after which the
phone abandons its attempt to
contact the PPM server.
Valid values are 2 through 3600.
RECORDINGTONE 0 Specifies whether call recording
tone is generated on active calls.
Value operation:
• 0: Call recording tone is not
generated (default).
• 1: Call recording tone is not
generated.
RECORDINGTONE_INTERVAL 15 Specifies the number of seconds
between call recording tones.
Valid values are 1 through 60.
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 292
Comments on this document? infodev@avaya.com
To Next Page
Loading...
