Avaya J129 - Page 297

Parameter name Default
value
Description
SCEPPASSWORD $SERIALN
O
Specifies the password to be
included in the change password
attribute of an SCEP certificate
request.
Values can contain 0 to 32 ASCII
characters (50 ASCII characters.
If the value contains $SERIALNO, it
is replaced by the phone's serial
number. If the value contains
$MACADDR, it is replaced by the
phone's MAC address in hex.
Note:
• A password prompt is
invoked when SCEP is set
for identity certificate
enrollment and the
parameter value is empty.
• This parameter must not be
set in a file that is accessible
on an enterprise network,
and only in a restricted
staging configuration.
SCREENSAVER_IMAGE N/A Specifies the screen saver images
those can be loaded from the
provisioning server.
Maximum five custom images can
be uploaded onto the phone. Only
the .jpeg file format are supported
and the maximum file size is
256KB.
Note that the image file name is
case sensitive.
SCREENSAVER_IMAGE_DISPLAY N/A Allows the administrator to display
the desired screen saver image.
Note that If
BACKGROUND_IMAGE_SELECT
ABLE is set to 1 then the end user
may override this setting.
Table continues…
List of configuration parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 297
Comments on this document? infodev@avaya.com