Parameter name Default
value
Description
USE_CONTACT_IN_REFERTO 1 Specifies which transfer target
address should be used in Refer-To
a header of REFER SIP request on
attended transfer.
Value operation:
• 0: Use CONTACT URI of the
transfer target in Refer-To header
of REFER SIP request.
• 1: Use TO URI of the transfer
target in Refer-To header of
REFER SIP request.
USE_EXCHANGE_CALENDAR 0 Specifies whether the Calendar
synchronizes with the Microsoft
Exchange.
Value operation:
• 0: To disable synchronization.
• 1: To enable synchronization.
USER_STORE_URI Specifies the URI path of IP Office
for storing user data.
Note:
If the value of this parameter is
set to null, then the addition,
deletion, and modification of
Contacts is disabled.
UUIDISPLAYTIME 10 Specifies the duration, in seconds,
that the UUI Information screen is
be displayed.
Valid values are 5 through 60.
V
Table continues…
Customizable parameters
July 2019 Installing and Administering Avaya J100 Series IP Phones 314
Comments on this document? infodev@avaya.com
To Next Page
Loading...
