260-668080-001 Rev 002 March 2013 5
Eclipse Edge User Manual
IDU RJ-45 to Wire Wrap Cable Assembly
The assemblies are available with cable lengths of 2 m, 5 m or 7.5 m. It provides a
balanced 120 ohm connection.
The wire is designed for use with insulation displacement, punch-down termination
blocks.
Each assembly supports one trib.
Receive specifies data in to the DAC module; Transmit is data out from the DAC.
Refer to Table A-3 for cable data.
Table A-3. IDU Wire Wrap Cable Data
Pin Function Wire Color
1 Receive Ring White / Orange
2 Receive Tip Orange / White
3 Optional Ground White / Green
4 Transmit Ring Blue / White
5 Transmit Tip White / Blue
6 Optional ground Green / White
7 Ground White / Brown
9 Ground Brown / White
To Next Page
Loading...