Aviat Networks ECLIPSE EDGE - Security Configuration; Security Screen

78 Aviat Networks
Chapter4. Eclipse Edge Configuration and Diagnostics
Security Configuration
The security screen enables activation or de-activation of login security, and
password editing.
Refer to: Security Screen.
Security Screen
When login security has been set, a window is displayed immediately after the Portal
Start-up window, in which username and password are prompted for admin,
engineer, or operator. Refer to Table 4-9 for username access details.
Table 4-9. Username Categories
Figure 4-23 shows the Security screen and login window for password activation.
Figure 4-23. Security Configuration Screen
Usernam
e
Default
Password
Enables
admin port_adm Security and password setting. Security can be enabled/
disabled, and passwords set and changed. Cannot view and
change Eclipse configuration or diagnostic settings, or
update software.
engineer port_eng Read/write access. An engineer can send changes to
Eclipse and update software, but cannot change password
or security settings.
operator port_op Read only. An operator cannot send changes to Eclipse or
update software, or change password or security settings.
1
3
2