260-668080-001 Rev 002 March 2013 1
Chapter4.Eclipse Edge
Configuration and Diagnostics
Eclipse Edge configuration and diagnostics requires the PC-based ‘Portal’ craft tool.
This section describes Portal features and its configuration and diagnostic options
and processes for Edge.
The main sections are:
• Introduction To Portal for Edge
• Setting Up Portal on page 7. Provides instructions for connecting your Portal PC
to an Eclipse Edge terminal.
• Installation and Configuration Process on page 25. Provides an overview of
the recommended installation and configuration process.
• Reports and Terminal Information on page 31. Provides information on the
report and information screen options.
• Plug-ins on page 35. Provides instructions for configuring the radio link, Ethernet
switch, and NxE1 tributaries.
• Circuits on page 53. Provides instructions for assigning radio link capacity
between Ethernet and PDH circuits.
• Networking Configuration on page 55. Provides instructions for setting network
management options.
• Date and Time Configuration on page 71. Provides instructions for setting
Edge terminal date and time.
• Software Management on page 73. Provides instructions for loading new
versions of software.
• Security Configuration on page 78. Provides instruction on optional security
settings for Portal access.
• Diagnostics on page 80. Provides guidance and instruction on diagnostic options.
To Next Page
Loading...
Need help?
General