24 Aviat Networks
Portal Informational Events
This section lists Portal informational events.
AIS Transmission Ceased
AIS transmission to customer connected equipment has ceased. The log entry
includes a reference to the affected tributary.
AIS Transmitted
AIS is being transmitted to customer connected equipment. The log entry includes a
reference to the affected tributary.
Alarm Output # Activated
Alarm output has been activated. The note field indicates if the output circuit is high
or low.
Alarm Output # Deactivated
Alarm output one has been deactivated. The note field indicates if the output circuit
is high or low.
ATPC Active
The ATPC function has been enabled by the user.
ATPC Inactive
The ATPC function has been disabled by the user.
ATPC Max Power for 15 Minutes
This info event is added to the log for each 15 minute period that ATPC is at
maximum.
ATPC Max Power Out of Range
The ATPC maximum power is above the maximum power or below the minimum
power capabilities.
ATPC Min Power Out of Range
The ATPC minimum power is above the maximum power or below the minimum
power capabilities.
To Next Page
Loading...
Need help?
General