260-668080-001 Rev 002 March 2013 13
Eclipse Edge User Manual
Setting Up Your PC TCP/IP Properties
Introduction
Your Portal PC must have a LAN-compatible address installed. Each radio in an
Eclipse network has a unique network address, unless connected on a LAN at the
same site, so you must change your PC TCP/IP settings each time you physically
connect to a different radio.
This requires configuration of your PC LAN card TCP/IP settings, so your PC is
recognized as a device on the Eclipse NMS LAN.
A procedure is provided for Windows XP.
Procedure: Windows XP
This procedure is based on a PC running Windows XP, there may be small differences
with other versions of Windows.
For guidance during this procedure refer to Example - Changing TCP/IP
Properties on page 15.
1. Click on the LAN (network connection) icon in the System Tray, located in the
lower right corner of your PC screen.
Or, from the Control Panel of your PC, select Network and Dial-up
Connections > Local Area Connection.
The Local Area Connection Status window is displayed.
2. Click Properties.
3. Select Internet Protocol (TCP/IP).
4. Ensure its associated box is ticked.
To Next Page
Loading...