Datalink (Optional)
Avidyne EX500/EX600 MFD -120- 600-00078-001 Rev 05
6) Send (or Delete Pending) key:
■ Send becomes available when you begin typing in the
Compose box. Press Send to move the text in the Compose
box to the message display area and queue it for
transmission. Note that only one message at a time can be in
the queue.
■ Delete Pending becomes available when there is a message
queued for transmission. Press Delete Pending to remove
the waiting message from the transmission queue and from
the display.
7) Clear key - Clears the text in the Compose box. The cursor
moves to the first position in the box. To delete just the last
character in the message, use the Prev Letter key or Pos knob.
8) Cursor Position - Depending on the type of MFD you have,
enter text in the Compose box as follows:
■ 2-Knob:
◆ Select Character - Use the Select knob to select letters
from an alphanumeric set (A-Z, 0-9, and punctuation).
◆ Position Cursor - Use the Prev Letter/Next Letter keys
to change position.
■ 4-Knob:
◆ Select Character - Turn the inner Select knob to select
letters from an alphanumeric set (A-Z, 0-9, and
punctuation).
◆ Position Cursor - Turn the outer ring of the Pos knob to
move the cursor position within the Compose text box.
9) Compose Box - Displays the text of an outgoing message as it is
being composed.
10) Scroll Up / Scroll Down (Not shown) - These keys appear if the
message display area is full and new messages are sent or
received. Press either key to scroll the message display area up
or down by one full message.
To Next Page
Loading...
