Updating Your Databases
600-00078-001 Rev 05 -139- Avidyne EX500/EX600 MFD
is complete when the, “Press Any Bezel Key” message is
displayed.
5) The Dataloader page shows the progress as it loads the data into
the MFD. After loading the data, the Dataloader performs an
integrity check on the data and, if all data is valid, displays a
successful data load message.
6) When the operation has been completed, the EX500/EX600 will
display the, “Press any Bezel Key” message.
7) At this point, turn OFF power to the EX500/EX600, remove your
portable USB device, and then turn the EX500/EX600 power
back on.
This step ensures that all data has been checked in self-test and
the MFD is ready for use.
8) Confirm the valid dates of the Chart data as reported on the
Startup Screen.
9) Go to the Chart page and select a chart from an airport that is
known to be in your subscription coverage area. Confirm that the
chart is available.
10) Store the portable USB devices in a safe place.
To Next Page
Loading...
Need help?
General
