Appendix
98 AX3000 Model 80WMS - User's Manual
Note: the symbol '>', beside a vertical menu item, indicates that it is a sub-
menu.
c) Dialog Boxes
Use the <Tab> or <> to move to next field or button. Use the <Shift><Tab> or
<> to move to previous field or button.
Two types of fields are distinguished in a dialog box:
- Button: press <Enter> or <Spacebar> to perform the associated action.
- Parameter: two types of value occur:
- A free value (numeric or character string): the data capture mode is
automatically enabled (see the next chapter).
- A discrete value: press <Spacebar> to show the permitted values
or to display a list of values. Move through lists with vertical arrow
keys; confirm the selected value by pressing <Enter>. Press <Esc>
to cancel.
Note: pressing <Enter> on a 'Parameter' field' allows the default button ([OK],
[Next]…) to be selected.
A.1.3 - Enter Data
When a 'free value" parameter field is selected, a value must be entered (it
cannot be selected from a list).
Note: to indicate ‘free value’ mode, the cursor blinks at the beginning of the field.
During this mode the following keys are enabled:
- <Tab>, <>, <Shift><Tab>, <>: valid the value and move to the
next/previous field.
- <Esc>: abandon your changes
- <> and <>: move the cursor within the character string
- <Home> and <End>: move the cursor directly to the beginning or the end
of the string
- <Del>: delete the character at the cursor position
- <Backspace>: delete the character before the cursor position
- <Insert>: one of two editing modes (Insertion/Overwrite)
To Next Page
Loading...
Need help?
General
