Interactive Set-Up
46 AX3000 Model 80WMS - User's Manual
- Windows Native Driver: printer driver name. It is ESSENTIAL that the
value entered here matches the printer driver name exactly as installed on
the server. If the match is not exact Windows will not be able to connect
the printer to the driver and the printer will not be added to the Windows
spooler.
- Time-out (sec): in event of a printer error (no paper, off-line, etc.), this is
the delay before the terminal reports the error to Windows.
- Save Printing Option: when the default printer configuration is modified
(on the server side), this option allows the terminal to store this
configuration (in the AX3000 Local Store). See Chapter 3.6.4.
The printer declaration is completed. For the redirection procedure, consult the
sub-section c).
b) Declaring a Redirected COM/LPT Port
On a connection a redirected COM/LPT port will be automatically added to the
Windows server resources. It will be removed on disconnection. Maximum two
ports can be redirected.
Before being redirected a COM Port must be declared at 'USB logical ports'
level.
To Next Page
Loading...
Need help?
General
