Interactive Set-Up
44 AX3000 Model 80WMS - User's Manual
established and removed when the session is disconnected.
The redirected resources mechanism allows one or more locally attached
peripherals to be 'published' to the Windows server. These resources are
available only for the terminal's user. They are created on the Windows server
when the connection is established and removed when the session is
disconnected.
The following local resources are supported:
- Printers: before being redirected each printer must be declared at the
'physical connection port' level. See first sub-section a) then c).
- Mass storage devices: see sub-section c).
- Smartcard readers: see sub-section c)
- COM/LPT ports before being redirected each port must be declared at
the physical port level. See first sub-section b) then c).
- USB ports: a set of eligible USB devices must be first defined (see
Chapter 3.2.5). Then see sub-section c)
a) Declaring a Redirected Printer
At the connection time a redirected printer will be automatically added to the
Windows spooler. It will be removed when the session disconnects.
Before being redirected a printer must be declared at the connection port' level.
The available ports are: USB logical ports and network printers.
To Next Page
Loading...
Need help?
General
