Interactive Set-Up
AX3000 Model 80WMS - User's Manual 35
Select the [Configuration]-[Terminal]-[Time settings] menu:
a) Internal Clock
Unlike a PC, there is no local clock (with battery) in Axel terminals. To provide a
local clock we have introduced support for a time client (NTP protocol). This
allows the time to be obtained when the terminal is powered on.
Enter the time server IP address (or the DNS name). This information can be
automatically obtained via the DHCP protocol. (See Chapter 3.1.2).
The date and time can be displayed within the terminal taskbar. The following
option allows the display formats to be selected:
- Date Format: 'JJ/MM/AA' or 'MM/JJ/AA'
- Time Format: 'HH:MM' or 'hh:MM'. (For the second format the time is
displayed 'modulo 12' with PM or AM after.)
b) Time Redirection
The terminal negotiates its own local time zone. This allows different ‘local times’
to be displayed on terminals in different geographic regions?
Note: the time zone redirection function must be enabled on the Windows 2003
server. See Chapter 5.5.6.
To Next Page
Loading...
Need help?
General
