Appendix
118 AX3000 Model 80WMS - User's Manual
allows the LUN number to handle to be selected. (If the LUN Number is too high,
the LUN #0 will be used).
Enhanced FAT Readahead: this option allows performances to be increased. It
could be disabled.
External USB mass storage devices (memory sticks, hard drives, CD/DVD
readers…) are redirected to the Windows/Citrix server and are seen as local
drives
The USB drive parameters are:
- Access Permission: 'Read Only' and 'Read/Write'
- Driver Letter: mnemonic given to the Windows server.
Important: this box allows “global” parameters to be set-up. It is necessary to
also enable/disable USB drive redirection for the MultiPoint session (see
Chapter 3.3.5).
A.6.3 - Session Level: Enhanced Parameters
Each session (screen or printer port) offers enhanced parameters. These
parameters are available through the "Connection Properties" box (depending
on the session type this box is located in the [Sessions]-[Session x] menu or
the [Aux. Ports]-[xxx] menu).
This is an example of the dialog box:
To Next Page
Loading...
Need help?
General
