Axel AX3000 80WMS User Manual

Initial Power-On
8 AX3000 Model 80WMS - User's Manual
This chapter describes the 'MultiPoint Set-Up' feature and the 'Auto-
Configuration' service.
When the terminal is switched on up for the very first time two configuration
methods are available:
- MultiPoint Set-Up: a unique dialog box allows the terminal to be set-up in
few seconds for typical use.
- Auto-Configuration: used in conjunction with AxRM, this function allows
the terminal to automatically receive new firmware and/or a configuration.
At any time pressing <Ctrl><Alt><Esc> will enter MultiPoint Set-Up. Pressing a
second time <Ctrl><Alt><Esc> will enter Terminal Set-Up.
2.1 - MULTIPOINT SET-UP
The 'MultiPoint' set-up is a unique Axel feature. This allows the Axel thin client to
be configured by selecting the name of the MultiPoint server from a list. For
example:
Note 1: To build this list, an IP address (given by a DHCP server) is needed.

Axel AX3000 80WMS Specifications

General

Brand	Axel
Model	AX3000 80WMS
Category	Server
Language	English