Interactive Set-Up
AX3000 Model 80WMS - User's Manual 25
against the terminal’s local CA certificates when an SSL connection is
established. (HTTPS or NLA). For this check to be possible there must be at
least one CA certificate stored in the terminal’s local store (see chapter 3.6.4). A
check is made between the terminal’s local CA certificates and the server’s
certificate.
With this setting enabled there are two further optional checks.
- Date Verification (requires an NTP time server to be configured - See
Chapter 3.2.6): A check is made to confirm the connection request is
initiated between the 'Valid After' and 'Valid Before' dates of the server
certificate.
- FQDN Verification: A check is made against the server’s FQDN or IP
address as given in the certificate’s 'Common Name' parameter
The ”Action on Error” option sets the terminal’s behavior when an SSL non-
compliant situation is met (See Chapter 4.3.3).
3.2 - GENERAL SETTINGS
The terminal general settings are available through the [Configuration]-
[Terminal] menu:
To Next Page
Loading...
Need help?
General
