Interactive Set-Up
34 AX3000 Model 80WMS - User's Manual
b) Keyboard Nationality
When the nationality of the keyboard is not listed by the terminal setup, a
country specific Microsoft keyboard code can be specified. This code is used
when an RDP/ICA session is established and allows any keyboard nationality to
be negotiated and supported by the terminal.
Note: The country code is only applied after a Windows connection is
established – so is not available at the terminal setup level.
The RDP Keyboard parameters are:
- Nationality: two possible values:
- Default: the keyboard nationality is given by the [Configuration]-
[General]-[Keyboard] menu. This setting is used by default for
Windows sessions, and if listed and selected no further action is
required. (This same nationality is used for character based sessions
and terminal setup menus)
- Custom: for nationalities not listed a custom keyboard nationality can
be entered. (Microsoft Keyboard Code parameter)
- Microsoft Keyboard Code: enter the required keyboard code value. See
Appendix A.6.5 for valid values.
- CAPS Key Mode: select "Shift Lock" or "Caps Lock".
3.2.6 - Time Settings
The time management is used for:
- Displaying date and time within the local taskbar.
- Updating modification/creation file time (memory stick support)
- Automatic terminal reboot
- SSL Certificates verification
To Next Page
Loading...
Need help?
General
