Interactive Set-Up
AX3000 Model 80WMS - User's Manual 39
Three operations are permitted:
- enter the password to access the set-up
- Press <Esc> or select the [Cancel] button to exit set-up mode
- Select the [Consult] button to access the set-up without using the
password. All set-up operations will be permitted but it will not be
possible to save the modifications.
The Consultation mode is not offered if the "Administrator Hot Key
disabled" option is set to "No". (See Appendix A.6.2)
IMPORTANT: if the password is not known, the super password 'yaka' can be
used. (Only from the local interactive set-up and only if "Administrator Hot Key
disabled" is set to "No". See Appendix A.6.2.)
3.3 - THE MULTIPOINT SESSION
To set a Microsoft MultiPoint session, enter the AX3000 Set-Up and select the
[Configuration]-[MultiPoint Session] menu. The following box is displayed:
Set the following parameters:
- Server: enter the MultiPoint server name (or IP address)
- Connection Properties: see Chapter 3.3.1.
- Authentication: set the "Automatic Logon" function and/or the "Auto-
Run" function. See Chapter 3.3.2.
- Display Parameters: see Chapter 3.3.3.
To Next Page
Loading...
Need help?
General
